进口自吸离心泵原理特点
进口自吸离心泵具有结构紧凑、操作方便、运行平稳、维护容易、效率高、寿命长，并有较强的自吸能力等优点。管路不需安装底阀，工作前只需保证泵体内储有定量引液即可。因此简化了管路系统，又改善了劳动条件。
应用范围
1、德国托马斯(Thomas)自吸离心泵适用于城市环保、建筑、消防、化工、制药、印染、酿造、电力、电镀、造纸、设备冷却等。
2、装上摇臂式喷头，又可将水冲到空中后，散成细小雨滴进行喷雾，是农场、苗圃、果园、茶园的良好机具。
3、适用于清水、海水及带有酸、碱度的化工介质液体和带有一般糊状的浆料(介质粘度、含固量可达30%以下)。不同液体可采用不同材质。分别于HT200、ICR18NIGTI、OCR18NIG、OCR17Ni14M02、ICR18NI12M02TI。
4、可和任何型号、规格的压滤机配套使用，将浆料送给压滤机进行压滤的最理想配套泵种。
Self-priming centrifugal pump has the advantages of compact structure, convenient operation, smooth operation, easy maintenance, high efficiency, long life and strong self-priming ability. Pipeline do not need to install the end of the valve, just before the work to ensure that the pump can be stored in a quantitative lead. Thus simplifying the piping system and improving the working conditions.
Application scope
1, Germany Thomas (Thomas) self-priming centrifugal pump for urban environmental protection, construction, fire, chemical, pharmaceutical, printing and dyeing, brewing, electricity, electroplating, paper, equipment cooling.
2, equipped with rocker-type nozzle, but also the water rushed to the air, scattered into small drops of rain to spray, is the farm, nursery, orchard, tea garden of good equipment.
3, for water, sea water and with acid and alkalinity of the chemical medium liquid and with a general paste of the slurry (medium viscosity, solid content up to 30% or less). Different liquids can use different materials. Respectively, in HT200, ICR18NIGTI, OCR18NIG, OCR17Ni14M02, ICR18NI12M02TI.
4, and any model, the specifications of the filter press supporting the use of the slurry to the filter press filter for the best matching pump.
进口自吸离心泵品牌
德国托马斯阀门集团于1933年创建于德国鲁尔工业区，也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺，所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。
德国托马斯阀门中国一级总代理