德国托马斯(Thomas)进口不锈钢离心泵是一种适应范围较广的多功能产品，可以输送各种包括水或工业液体在内的不同介质，适用于不同温度、流量和压力范围。其典型应用主要包括以下方面：
Stainless steel centrifugal pump is made of stainless steel plate punching expansion welding and other advanced technology, is the first new generation of international centrifugal pump, can replace the traditional centrifugal pump and the general corrosion-resistant pump. Its beautiful appearance, light structure, energy efficient, durable and resistant to light corrosion, low noise and so on.
Applications
Germany Thomas imports of stainless steel centrifugal pump is a wide range of multi-functional products, can transport a variety of water or industrial liquids, including different media, suitable for different temperature, flow and pressure range. Its typical applications include the following:
Water supply: water plant filtration, transportation and district water supply and charge pressurization;
Industrial pressurization: process water system, cleaning system;
Industrial liquid transport: boiler feed water, condensation system, cooling and air conditioning systems, machine tools, acid and alkali transport;
Water treatment: distillation system or separator, swimming pool, etc .;
Farmland irrigation, petrochemical, medicine and health.
Installation conditions
Stainless steel centrifugal pump for the pump shaft direct connection, by the pump, pump shaft and the standard motor:
1, the pump should be installed in the ventilation and anti-frozen place;
2, the pump is installed to ensure that the pump is not affected by the tension of the system piping;
3, if the pump installed in the outdoors, you must configure the appropriate cover to prevent the electrical components into the water or condensation;
4, in order to facilitate the inspection and maintenance, in the unit should be left around enough space;
5, the electrical wiring device should ensure that the pump from the lack of phase, voltage instability, leakage and overload damage;
6, the pump should be installed horizontally on the base, the horizontal direction of the pump suction port, the vertical direction for the pump discharge.
Operating conditions
1, clean, thin, non-flammable and explosive does not contain solid particles and fiber liquid;
2, a temperature between -20 ° C and + 100 ° C;
3, the maximum ambient temperature +40 ℃;
4, the highest elevation of 1000 meters;
5, the system maximum pressure 10bar.
6, product motor
7, the motor is fully enclosed, air-cooled two-pole standard motor;
8, protection class: IP55;
9, insulation class: F;
10, the standard voltage: 50Hz 1 × 220V 3 × 380V
德国托马斯阀门集团于1933年创建于德国鲁尔工业区，也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺，所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。
德国托马斯阀门中国一级总代理