进口卧式多级离心泵原理特点及品牌（图）

进口卧式多级离心泵多用于家庭的中央空调循环以及工业上的传输液体。比如矿物质水、软水、净化系统、清油等介质的增压和循环。适用于自来水到工业液体的各种介质，适合不同温度，不同流量的和压力范围。配卧式加长轴电机，轴向吸入，径向排出。泵的过流部件均为不锈钢冲压成形。产品具有适应范围广，高效节能。

应用范围

1、小型中央空调循环

2、冷却系统,·工业清洗

3、水处理(水的净化)

4、水产养殖, 施肥/计量系统

工作条件

稀薄、干净、不凝、不爆炸、不含固体颗粒或纤维的液体。

液体温度： 常温型－15℃至+70℃

热水型+70℃至+110℃

最大环境温度：+40℃

最大运作压力：10bar

电机

电机为全封闭，风冷式二极标准电机。

防护等级：IP55, 绝缘等级：F

Horizontal multi-stage centrifugal pumps are used for home central air conditioning cycles as well as for industrial transmission of liquids. Such as mineral water, soft water, purification system, oil and other media pressurization and circulation. Suitable for tap water to industrial liquids for a variety of media, suitable for different temperatures, different flow and pressure range. With horizontal extension shaft motor, axial suction, radial discharge. The pump flow components are stainless steel stamping. Products with a wide range of adaptations, energy efficient.

Application scope

1, small central air conditioning cycle

2, cooling system, industrial cleaning

3, water treatment (water purification)

4, aquaculture, fertilization / metering systems

Working conditions

Thin, clean, not condensate, no explosion, no solid particles or fiber liquid.

Liquid temperature: room temperature type -15 ℃ to +70 ℃

Hot water type + 70 ℃ to + 110 ℃

Maximum ambient temperature: + 40 ℃

Maximum operating pressure: 10 bar

Motor

The motor is fully enclosed, air-cooled two-pole standard motor.