Welcome to Thomas valves website
公司新闻

您的位置:德国托马斯阀门(Thomas) - 公司新闻

进口管道排污泵原理特点及品牌(图)

作者:托马斯·贝尔森·伍德 发布时间:2021-01-16 13:04:52点击:
进口管道排污泵

进口管道排污泵原理特点

进口管道排污泵安装方便,用途广泛既可作一般管道泵为高层建筑加压送水之用,又可输送含有颗粒纤维污水,除适用输送污水外,还适用于作疏水泵,过滤冲洗冷凝循环泵等。德国托马斯(Thomas)管道排污泵采用独特叶轮结构和新型机械密封,能有效地输送含有固体物和长纤维。叶轮与传统叶轮相比,该泵叶轮采用单流道或双流道形式,它类似于一截面大小相同的弯管,具有非常好的过流性,配以合理的蜗室,使得该泵具有效率高、叶轮经动静平衡试验,使泵在运行中无振动。
适用范围
进口管道排污泵适用于工厂商业严重污染废水的排放、主宅区的污水排污站、城市污水处理厂派水系统、人防系统排水站、自来水厂的给水设备、医院、宾馆的污水排放、市政工程建筑工地、矿山配套附机、农村沼气池、农田灌溉等行业,输送带颗粒的污水,污物,也可用于清水及带弱腐蚀性介质。
使用条件
1、使用环境温度≤40℃,湿度≤95%;海拔高度≤1000米。
2、介质温度不超过60℃,介质重度为1~1.3kg/dm3。
3、铸铁材质的使用范围这PH5~9。
4、不锈钢材质可使用一般腐蚀性介质。
5、使用环境海拔高度不超过1000米。
产品特点
1、泵与电机直联同轴,属机电一体化产品,结构紧凑,性能稳定。
2、大流道抗堵塞水力部件设计,大大提高污物通过能力,能有效通过泵口径的5倍纤维物质和直径为泵口径约50%的固体颗粒。
3、设计合理,配套电机合理,效率高,噪音低,节能效果显著。
4、机械密封采用硬质耐磨碳化钨,具有耐用、耐磨等特点,可以使泵安全连续运行8000小时以上。
5、泵为立式结构,进出口中心线在同一水平线上,且进出口法兰规格相同,安装拆卸十分方便。
6、占地面积小,无需建机房,可节省大量基建费用;在电机风叶端加上防护罩,整机可置于室外工作。
Pipeline sewage pump is easy to install, widely used for general pipeline pump for high-rise building pressurized water supply, but also transport containing granular fiber sewage, in addition to transport sewage, but also for drainage pumps, filter flushing condensate pump The Germany Thomas pipeline sewage pump with a unique impeller structure and a new mechanical seal, can effectively transport containing solid and long fiber. Impeller Compared with traditional impeller, the pump impeller with a single channel or double channel form, it is similar to a cross-section of the same size of the elbow, with a very good overcurrent, coupled with a reasonable spiral chamber, making the pump with efficiency High, impeller by static and static test, so that the pump in the run without vibration.
The scope of application
Import pipeline sewage pump for the factory business serious pollution of wastewater discharge, the main residential sewage sewage station, urban sewage treatment plant water system, air defense system drainage station, water plant water supply equipment, hospitals, hotels, sewage discharge, municipal works Construction sites, mining supporting machine, rural biogas digesters, farmland irrigation and other industries, conveyor belt particles of sewage, dirt, can also be used for water and with weak corrosive media.
Conditions of Use
1, the use of ambient temperature ≤ 40 ℃, humidity ≤ 95%; altitude ≤ 1000 meters.
2, the medium temperature does not exceed 60 ℃, medium heavyness of 1 ~ 1.3kg / dm3.
3, the use of cast iron material PH5 ~ 9.
4, stainless steel material can use the general corrosive media.
5, the use of environmental altitude of not more than 1000 meters.
Features
1, pump and motor direct coaxial, mechanical and electrical integration products, compact structure, stable performance.
2, large flowway anti-blocking hydraulic components designed to greatly improve the dirt through the ability to effectively pass the pump diameter of 5 times the fiber material and diameter of about 50% of the diameter of the pump particles.
3, the design is reasonable, supporting the motor is reasonable, high efficiency, low noise, energy saving effect is remarkable.
4, mechanical seal with hard wear-resistant tungsten carbide, with durable, wear and other characteristics, can make the pump safe continuous operation for more than 8000 hours.
5, the pump for the vertical structure, import and export center line in the same level, and import and export flange specifications the same, installation and removal is very convenient.

6, covers an area of small, no need to build the engine room, can save a lot of infrastructure costs; in the fan side with a protective cover, the machine can be placed in outdoor work.

进口管道排污泵品牌

进口管道排污泵品牌
德国托马斯阀门集团于1933年创建于德国鲁尔工业区,也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺,所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。